Set of 2 A202 48 x 5.3 mm tongue/groove profile cross-beams for router toolholders - Diamwood Platinum

Ref. DW-PLA477479CFHT50002

*Photos non contractuelles

Partager ce produit

En savoir + sur Set of 2 A202 48 x 5.3 mm tongue/groove profile cross-beams for router toolholders - Diamwood Platinum

Set of 2 profiled counter-irons Ht. 48 x 5.3 mm tongue / groove 8 mm A202 for router toolholders. The counter-irons must be used with profiled irons mounted on the tool-holder. Iron thickness: 5.3 mm. Quality: steel. Hole spacing (24 mm) compatible with most height 50 tool holders on the market (CMT, LEMAN, HOLZMANN, KITY, ISOCELE, HOLZPROFI, ELBE, etc.). A 50 mm high iron or counter-iron cannot be mounted on a 40 mm high tool holder. The iron compatible with this reference is the M202 (Ht. 50 x 5.5 mm). Diamwood PLATINUM products are top-of-the-range for intensive professional use. This product is of high quality SWISS design and complies with current standards. Diamwood, expert in equipment for the building trade, has been mastering tools and stationary machines for over 15 years.

Data sheet

Type of product	Contre-fers profilés
Colour	5,3
Height	48
new	Languette / rainure 8 mm
Material	Acier
Recommendation	Bois
Content	2
Person responsible EU	PRESTA'DIAM 26 Chemin du Godard 38110 ST Didier de la Tour Email : contact@prestadiam.fr
WARNING and SAFETY	Warning and Safety Information Safety Warning: This product is intended for professional and domestic use. Please follow the instructions below to ensure safe use: Proper Use: Use this tool only in accordance with the instructions provided. Do not use this tool for unintended applications. General precautions: Always wear personal protective equipment (gloves, safety goggles, hearing protection). Make sure the work area is clean and clear. Do not use the tool near water or in damp conditions. Handling and storage: Keep the tool out of the reach of children. Store the tool in a safe, dry place when not in use. Check the condition of the tool regularly. If damaged, remove immediately from use. Risk warning: This tool may present a risk of cuts, crushing or other injuries. In the event of injury, consult a doctor immediately. Recycling and disposal: Follow local regulations for disposal of this product Person responsible in the EU for our products: PRESTA'DIAM 26 Chemin du Godard 38110 ST Didier de la Tour Email: contact@prestadiam.fr
User manual	Présentation du produit : Le jeu de 2 contre-fers profilés Diamwood est conçu pour des opérations précises sur des toupies. Ses dimensions de 48 x 5,3 mm et son utilisation en acier font de ce produit un allié fiable pour les professionnels du BTP. Caractéristiques principales : - Matériau : Acier de haute qualité - Dimensions : Hauteur 48 mm, Épaisseur 5,3 mm - Entraxe des trous : 24 mm, compatible avec porte-outils haute 50 mm - Utilisation : conçu pour des fers profilés sur porte-outils de toupie Instructions d’utilisation : 1. Vérifiez que votre porte-outils est compatible avec la hauteur des contre-fers. 2. Alignez les contre-fers ployant avec les trous sur le porte-outils. 3. Serrez les vis de fixation pour un maintien sécurisé. 4. Testez l’ensemble avant de commencer l’utilisation pour assurer la sécurité. Précautions d’utilisation : - Ne pas utiliser avec des outils non compatibles. - Vérifiez toujours l’état de vos contre-fers pour éviter des accidents. - Utilisez des gants lors de la manipulation pour éviter les blessures. Entretien et nettoyage : - Gardez les contre-fers propres et secs après chaque usage. - Nettoyez les résidus de bois ou de poussière pour éviter l’usure. - Rangez dans un endroit sec pour préserver la qualité de l’acier.

10 produits dans Profile irons

Set of 2 A09 counter-irons 38 x 4 mm high for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40007

Set of 2 A09 counter-irons 38 x 4 mm high for router tool holders - Diamwood Platinum

7,10€

5,92€ HT

Set of 2 Ht. 38 x 4 mm quarter-round profiled counter-irons and A11 heel for router toolholders - Diamwood Platinum

Ref. DW-PLA477479CFHT40008

Set of 2 Ht. 38 x 4 mm quarter-round profiled counter-irons and A11 heel for router toolholders - Diamwood Platinum

8,10€

6,75€ HT

Set of 2 profile counter-irons Ht. 38 x 4 mm A12 groove leave for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40009

Set of 2 profile counter-irons Ht. 38 x 4 mm A12 groove leave for router tool holders - Diamwood Platinum

9,10€

7,58€ HT

Set of 2 profile counter-irons Ht. 38 x 4 mm leave A13 for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40010

Set of 2 profile counter-irons Ht. 38 x 4 mm leave A13 for router tool holders - Diamwood Platinum

16,10€

13,42€ HT

Set of 2 A14 wolf's mouth profile counter-irons Ht. 38 x 4 mm for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40011

Set of 2 A14 wolf's mouth profile counter-irons Ht. 38 x 4 mm for router tool holders - Diamwood Platinum

15,10€

12,58€ HT

Set of 2 profile counter-irons Height 38 x 4 mm Bevel 22° A01 for router toolholders - Diamwood Platinum

Ref. DW-PLA477479CFHT40000

Set of 2 profile counter-irons Height 38 x 4 mm Bevel 22° A01 for router toolholders - Diamwood Platinum

7,10€

5,92€ HT

Set of 2 Ht. 38 x 4 mm double fillet A03 profile counter-irons for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40002

Set of 2 Ht. 38 x 4 mm double fillet A03 profile counter-irons for router tool holders - Diamwood Platinum

7,10€

5,92€ HT

Set of 2 profile counter-irons Ht. 38 x 4 mm boudon and fillet A04 for router toolholders - Diamwood Platinum

Ref. DW-PLA477479CFHT40003

Set of 2 profile counter-irons Ht. 38 x 4 mm boudon and fillet A04 for router toolholders - Diamwood Platinum

6,10€

5,08€ HT

Set of 2 Ht. 38 x 4 mm quarter-round profiled counter-irons and A05 fillet for router toolholders - Diamwood Platinum

Ref. DW-PLA477479CFHT40004

Set of 2 Ht. 38 x 4 mm quarter-round profiled counter-irons and A05 fillet for router toolholders - Diamwood Platinum

7,10€

5,92€ HT

Set of 2 profiled counter-irons Ht. 38 x 4 mm handrail A08 for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40006

Set of 2 profiled counter-irons Ht. 38 x 4 mm handrail A08 for router tool holders - Diamwood Platinum

8,10€

6,75€ HT

Set of 2 A09 counter-irons 38 x 4 mm high for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40007

Set of 2 A09 counter-irons 38 x 4 mm high for router tool holders - Diamwood Platinum

7,10€

5,92€ HT

Set of 2 Ht. 38 x 4 mm quarter-round profiled counter-irons and A11 heel for router toolholders - Diamwood Platinum

Ref. DW-PLA477479CFHT40008

Set of 2 Ht. 38 x 4 mm quarter-round profiled counter-irons and A11 heel for router toolholders - Diamwood Platinum

8,10€

6,75€ HT

Set of 2 profile counter-irons Ht. 38 x 4 mm A12 groove leave for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40009

Set of 2 profile counter-irons Ht. 38 x 4 mm A12 groove leave for router tool holders - Diamwood Platinum

9,10€

7,58€ HT

Set of 2 profile counter-irons Ht. 38 x 4 mm leave A13 for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40010

Set of 2 profile counter-irons Ht. 38 x 4 mm leave A13 for router tool holders - Diamwood Platinum

16,10€

13,42€ HT

Set of 2 A14 wolf's mouth profile counter-irons Ht. 38 x 4 mm for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40011

Set of 2 A14 wolf's mouth profile counter-irons Ht. 38 x 4 mm for router tool holders - Diamwood Platinum

15,10€

12,58€ HT

Set of 2 profile counter-irons Height 38 x 4 mm Bevel 22° A01 for router toolholders - Diamwood Platinum

Ref. DW-PLA477479CFHT40000

Set of 2 profile counter-irons Height 38 x 4 mm Bevel 22° A01 for router toolholders - Diamwood Platinum

7,10€

5,92€ HT

Set of 2 Ht. 38 x 4 mm double fillet A03 profile counter-irons for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40002

Set of 2 Ht. 38 x 4 mm double fillet A03 profile counter-irons for router tool holders - Diamwood Platinum

7,10€

5,92€ HT

Set of 2 profile counter-irons Ht. 38 x 4 mm boudon and fillet A04 for router toolholders - Diamwood Platinum

Ref. DW-PLA477479CFHT40003

Set of 2 profile counter-irons Ht. 38 x 4 mm boudon and fillet A04 for router toolholders - Diamwood Platinum

6,10€

5,08€ HT

Set of 2 Ht. 38 x 4 mm quarter-round profiled counter-irons and A05 fillet for router toolholders - Diamwood Platinum

Ref. DW-PLA477479CFHT40004

Set of 2 Ht. 38 x 4 mm quarter-round profiled counter-irons and A05 fillet for router toolholders - Diamwood Platinum

7,10€

5,92€ HT

Set of 2 profiled counter-irons Ht. 38 x 4 mm handrail A08 for router tool holders - Diamwood Platinum

Ref. DW-PLA477479CFHT40006

Set of 2 profiled counter-irons Ht. 38 x 4 mm handrail A08 for router tool holders - Diamwood Platinum

8,10€

6,75€ HT

Cookie name	Provider	Purpose	Expiry
collect	Google	It is used to send data to Google Analytics about the visitor's device and its behavior. Track the visitor across devices and marketing channels.	Session
PHP_SESSID	www.prestadiam.fr	This cookie is native to PHP and enables websites to store serialised state data. It is used to establish a user session and to pass state data via a temporary cookie, which is commonly referred to as a session cookie.	Session
PrestaShop-#	www.prestadiam.fr	This cookie helps keep user sessions open while they are visiting a website, and help them make orders and many more operations such as: cookie add date, selected language, used currency, last product category visited, last seen products, client identification, name, first name, encrypted password, email linked to the account, shopping cart identification.	480 hours
r/collect	Google	It is used to send data to Google Analytics about the visitor's device and its behavior. Track the visitor across devices and marketing channels.	Session
_ga	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	2 years
_gat	Google	Used by Google Analytics to throttle request rate	1 day
_gd#	Google	This is a Google Analytics Session cookie used to generate statistical data on how you use the website which is removed when you quit your browser.	Session
_gid	Google	Registers a unique ID that is used to generate statistical data on how the visitor uses the website.	1 day